StatefulSet Basics
This tutorial provides an introduction to managing applications with StatefulSets. It demonstrates how to create, delete, scale, and update the Pods of StatefulSets.
Before you begin
Before you begin this tutorial, you should familiarize yourself with the following Kubernetes concepts:
- Pods
- Cluster DNS
- Headless Services
- PersistentVolumes
- PersistentVolume Provisioning
- The kubectl command line tool
You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:
You should configure kubectl to use a context that uses the default
namespace.
If you are using an existing cluster, make sure that it's OK to use that
cluster's default namespace to practice. Ideally, practice in a cluster
that doesn't run any real workloads.
It's also useful to read the concept page about StatefulSets.
Objectives
StatefulSets are intended to be used with stateful applications and distributed systems. However, the administration of stateful applications and distributed systems on Kubernetes is a broad, complex topic. In order to demonstrate the basic features of a StatefulSet, and not to conflate the former topic with the latter, you will deploy a simple web application using a StatefulSet.
After this tutorial, you will be familiar with the following.
- How to create a StatefulSet
- How a StatefulSet manages its Pods
- How to delete a StatefulSet
- How to scale a StatefulSet
- How to update a StatefulSet's Pods
Creating a StatefulSet
Begin by creating a StatefulSet using the example below. It is similar to the
example presented in the
StatefulSets concept.
It creates a headless Service,
nginx, to publish the IP addresses of Pods in the StatefulSet, web.
apiVersion: v1
kind: Service
metadata:
name: nginx
labels:
app: nginx
spec:
ports:
- port: 80
name: web
clusterIP: None
selector:
app: nginx
---
apiVersion: apps/v1
kind: StatefulSet
metadata:
name: web
spec:
serviceName: "nginx"
replicas: 2
selector:
matchLabels:
app: nginx
template:
metadata:
labels:
app: nginx
spec:
containers:
- name: nginx
image: registry.k8s.io/nginx-slim:0.8
ports:
- containerPort: 80
name: web
volumeMounts:
- name: www
mountPath: /usr/share/nginx/html
volumeClaimTemplates:
- metadata:
name: www
spec:
accessModes: [ "ReadWriteOnce" ]
resources:
requests:
storage: 1Gi
You will need to use at least two terminal windows. In the first terminal, use
kubectl get to watch the creation
of the StatefulSet's Pods.
# use this terminal to run commands that specify --watch
# end this watch when you are asked to start a new watch
kubectl get pods --watch -l app=nginx
In the second terminal, use
kubectl apply to create the
headless Service and StatefulSet:
kubectl apply -f https://k8s.io/examples/application/web/web.yaml
service/nginx created
statefulset.apps/web created
The command above creates two Pods, each running an
NGINX webserver. Get the nginx Service...
kubectl get service nginx
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
nginx ClusterIP None <none> 80/TCP 12s
...then get the web StatefulSet, to verify that both were created successfully:
kubectl get statefulset web
NAME DESIRED CURRENT AGE
web 2 1 20s
Ordered Pod creation
For a StatefulSet with n replicas, when Pods are being deployed, they are
created sequentially, ordered from {0..n-1}. Examine the output of the
kubectl get command in the first terminal. Eventually, the output will
look like the example below.
# Do not start a new watch;
# this should already be running
kubectl get pods --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 0/1 Pending 0 0s
web-0 0/1 Pending 0 0s
web-0 0/1 ContainerCreating 0 0s
web-0 1/1 Running 0 19s
web-1 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-1 0/1 ContainerCreating 0 0s
web-1 1/1 Running 0 18s
Notice that the web-1 Pod is not launched until the web-0 Pod is
Running (see Pod Phase)
and Ready (see type in Pod Conditions).
Pods in a StatefulSet
Pods in a StatefulSet have a unique ordinal index and a stable network identity.
Examining the Pod's ordinal index
Get the StatefulSet's Pods:
kubectl get pods -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 1m
web-1 1/1 Running 0 1m
As mentioned in the StatefulSets
concept, the Pods in a StatefulSet have a sticky, unique identity. This identity
is based on a unique ordinal index that is assigned to each Pod by the
StatefulSet controller.
The Pods' names take the form <statefulset name>-<ordinal index>.
Since the web StatefulSet has two replicas, it creates two Pods, web-0 and web-1.
Using stable network identities
Each Pod has a stable hostname based on its ordinal index. Use
kubectl exec to execute the
hostname command in each Pod:
for i in 0 1; do kubectl exec "web-$i" -- sh -c 'hostname'; done
web-0
web-1
Use kubectl run to execute
a container that provides the nslookup command from the dnsutils package.
Using nslookup on the Pods' hostnames, you can examine their in-cluster DNS
addresses:
kubectl run -i --tty --image busybox:1.28 dns-test --restart=Never --rm
which starts a new shell. In that new shell, run:
# Run this in the dns-test container shell
nslookup web-0.nginx
The output is similar to:
Server: 10.0.0.10
Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local
Name: web-0.nginx
Address 1: 10.244.1.6
nslookup web-1.nginx
Server: 10.0.0.10
Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local
Name: web-1.nginx
Address 1: 10.244.2.6
(and now exit the container shell: exit)
The CNAME of the headless service points to SRV records (one for each Pod that is Running and Ready). The SRV records point to A record entries that contain the Pods' IP addresses.
In one terminal, watch the StatefulSet's Pods:
# Start a new watch
# End this watch when you've seen that the delete is finished
kubectl get pod --watch -l app=nginx
In a second terminal, use
kubectl delete to delete all
the Pods in the StatefulSet:
kubectl delete pod -l app=nginx
pod "web-0" deleted
pod "web-1" deleted
Wait for the StatefulSet to restart them, and for both Pods to transition to Running and Ready:
# This should already be running
kubectl get pod --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 0/1 ContainerCreating 0 0s
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 2s
web-1 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-1 0/1 ContainerCreating 0 0s
web-1 1/1 Running 0 34s
Use kubectl exec and kubectl run to view the Pods' hostnames and in-cluster
DNS entries. First, view the Pods' hostnames:
for i in 0 1; do kubectl exec web-$i -- sh -c 'hostname'; done
web-0
web-1
then, run:
kubectl run -i --tty --image busybox:1.28 dns-test --restart=Never --rm
which starts a new shell.
In that new shell, run:
# Run this in the dns-test container shell
nslookup web-0.nginx
The output is similar to:
Server: 10.0.0.10
Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local
Name: web-0.nginx
Address 1: 10.244.1.7
nslookup web-1.nginx
Server: 10.0.0.10
Address 1: 10.0.0.10 kube-dns.kube-system.svc.cluster.local
Name: web-1.nginx
Address 1: 10.244.2.8
(and now exit the container shell: exit)
The Pods' ordinals, hostnames, SRV records, and A record names have not changed, but the IP addresses associated with the Pods may have changed. In the cluster used for this tutorial, they have. This is why it is important not to configure other applications to connect to Pods in a StatefulSet by IP address.
Discovery for specific Pods in a StatefulSet
If you need to find and connect to the active members of a StatefulSet, you
should query the CNAME of the headless Service
(nginx.default.svc.cluster.local). The SRV records associated with the
CNAME will contain only the Pods in the StatefulSet that are Running and
Ready.
If your application already implements connection logic that tests for
liveness and readiness, you can use the SRV records of the Pods (
web-0.nginx.default.svc.cluster.local,
web-1.nginx.default.svc.cluster.local), as they are stable, and your
application will be able to discover the Pods' addresses when they transition
to Running and Ready.
Writing to stable storage
Get the PersistentVolumeClaims for web-0 and web-1:
kubectl get pvc -l app=nginx
The output is similar to:
NAME STATUS VOLUME CAPACITY ACCESSMODES AGE
www-web-0 Bound pvc-15c268c7-b507-11e6-932f-42010a800002 1Gi RWO 48s
www-web-1 Bound pvc-15c79307-b507-11e6-932f-42010a800002 1Gi RWO 48s
The StatefulSet controller created two PersistentVolumeClaims that are bound to two PersistentVolumes.
As the cluster used in this tutorial is configured to dynamically provision PersistentVolumes, the PersistentVolumes were created and bound automatically.
The NGINX webserver, by default, serves an index file from
/usr/share/nginx/html/index.html. The volumeMounts field in the
StatefulSet's spec ensures that the /usr/share/nginx/html directory is
backed by a PersistentVolume.
Write the Pods' hostnames to their index.html files and verify that the NGINX
webservers serve the hostnames:
for i in 0 1; do kubectl exec "web-$i" -- sh -c 'echo "$(hostname)" > /usr/share/nginx/html/index.html'; done
for i in 0 1; do kubectl exec -i -t "web-$i" -- curl http://localhost/; done
web-0
web-1
If you instead see 403 Forbidden responses for the above curl command,
you will need to fix the permissions of the directory mounted by the volumeMounts
(due to a bug when using hostPath volumes),
by running:
for i in 0 1; do kubectl exec web-$i -- chmod 755 /usr/share/nginx/html; done
before retrying the curl command above.
In one terminal, watch the StatefulSet's Pods:
# End this watch when you've reached the end of the section.
# At the start of "Scaling a StatefulSet" you'll start a new watch.
kubectl get pod --watch -l app=nginx
In a second terminal, delete all of the StatefulSet's Pods:
kubectl delete pod -l app=nginx
pod "web-0" deleted
pod "web-1" deleted
Examine the output of the kubectl get command in the first terminal, and wait
for all of the Pods to transition to Running and Ready.
# This should already be running
kubectl get pod --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 0/1 ContainerCreating 0 0s
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 2s
web-1 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-1 0/1 ContainerCreating 0 0s
web-1 1/1 Running 0 34s
Verify the web servers continue to serve their hostnames:
for i in 0 1; do kubectl exec -i -t "web-$i" -- curl http://localhost/; done
web-0
web-1
Even though web-0 and web-1 were rescheduled, they continue to serve their
hostnames because the PersistentVolumes associated with their
PersistentVolumeClaims are remounted to their volumeMounts. No matter what
node web-0and web-1 are scheduled on, their PersistentVolumes will be
mounted to the appropriate mount points.
Scaling a StatefulSet
Scaling a StatefulSet refers to increasing or decreasing the number of replicas.
This is accomplished by updating the replicas field. You can use either
kubectl scale or
kubectl patch to scale a StatefulSet.
Scaling up
In one terminal window, watch the Pods in the StatefulSet:
# If you already have a watch running, you can continue using that.
# Otherwise, start one.
# End this watch when there are 5 healthy Pods for the StatefulSet
kubectl get pods --watch -l app=nginx
In another terminal window, use kubectl scale to scale the number of replicas
to 5:
kubectl scale sts web --replicas=5
statefulset.apps/web scaled
Examine the output of the kubectl get command in the first terminal, and wait
for the three additional Pods to transition to Running and Ready.
# This should already be running
kubectl get pod --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 2h
web-1 1/1 Running 0 2h
NAME READY STATUS RESTARTS AGE
web-2 0/1 Pending 0 0s
web-2 0/1 Pending 0 0s
web-2 0/1 ContainerCreating 0 0s
web-2 1/1 Running 0 19s
web-3 0/1 Pending 0 0s
web-3 0/1 Pending 0 0s
web-3 0/1 ContainerCreating 0 0s
web-3 1/1 Running 0 18s
web-4 0/1 Pending 0 0s
web-4 0/1 Pending 0 0s
web-4 0/1 ContainerCreating 0 0s
web-4 1/1 Running 0 19s
The StatefulSet controller scaled the number of replicas. As with StatefulSet creation, the StatefulSet controller created each Pod sequentially with respect to its ordinal index, and it waited for each Pod's predecessor to be Running and Ready before launching the subsequent Pod.
Scaling down
In one terminal, watch the StatefulSet's Pods:
# End this watch when there are only 3 Pods for the StatefulSet
kubectl get pod --watch -l app=nginx
In another terminal, use kubectl patch to scale the StatefulSet back down to
three replicas:
kubectl patch sts web -p '{"spec":{"replicas":3}}'
statefulset.apps/web patched
Wait for web-4 and web-3 to transition to Terminating.
# This should already be running
kubectl get pods --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 3h
web-1 1/1 Running 0 3h
web-2 1/1 Running 0 55s
web-3 1/1 Running 0 36s
web-4 0/1 ContainerCreating 0 18s
NAME READY STATUS RESTARTS AGE
web-4 1/1 Running 0 19s
web-4 1/1 Terminating 0 24s
web-4 1/1 Terminating 0 24s
web-3 1/1 Terminating 0 42s
web-3 1/1 Terminating 0 42s
Ordered Pod termination
The controller deleted one Pod at a time, in reverse order with respect to its ordinal index, and it waited for each to be completely shutdown before deleting the next.
Get the StatefulSet's PersistentVolumeClaims:
kubectl get pvc -l app=nginx
NAME STATUS VOLUME CAPACITY ACCESSMODES AGE
www-web-0 Bound pvc-15c268c7-b507-11e6-932f-42010a800002 1Gi RWO 13h
www-web-1 Bound pvc-15c79307-b507-11e6-932f-42010a800002 1Gi RWO 13h
www-web-2 Bound pvc-e1125b27-b508-11e6-932f-42010a800002 1Gi RWO 13h
www-web-3 Bound pvc-e1176df6-b508-11e6-932f-42010a800002 1Gi RWO 13h
www-web-4 Bound pvc-e11bb5f8-b508-11e6-932f-42010a800002 1Gi RWO 13h
There are still five PersistentVolumeClaims and five PersistentVolumes. When exploring a Pod's stable storage, we saw that the PersistentVolumes mounted to the Pods of a StatefulSet are not deleted when the StatefulSet's Pods are deleted. This is still true when Pod deletion is caused by scaling the StatefulSet down.
Updating StatefulSets
The StatefulSet controller supports automated updates. The
strategy used is determined by the spec.updateStrategy field of the
StatefulSet API object. This feature can be used to upgrade the container
images, resource requests and/or limits, labels, and annotations of the Pods in a
StatefulSet.
There are two valid update strategies, RollingUpdate (the default) and
OnDelete.
RollingUpdate
The RollingUpdate update strategy will update all Pods in a StatefulSet, in
reverse ordinal order, while respecting the StatefulSet guarantees.
You can split updates to a StatefulSet that uses the RollingUpdate strategy
into partitions, by specifying .spec.updateStrategy.rollingUpdate.partition.
You'll practice that later in this tutorial.
First, try a simple rolling update.
In one terminal window, patch the web StatefulSet to change the container
image again:
kubectl patch statefulset web --type='json' -p='[{"op": "replace", "path": "/spec/template/spec/containers/0/image", "value":"gcr.io/google_containers/nginx-slim:0.8"}]'
statefulset.apps/web patched
In another terminal, watch the Pods in the StatefulSet:
# End this watch when the rollout is complete
#
# If you're not sure, leave it running one more minute
kubectl get pod -l app=nginx --watch
The output is similar to:
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 7m
web-1 1/1 Running 0 7m
web-2 1/1 Running 0 8m
web-2 1/1 Terminating 0 8m
web-2 1/1 Terminating 0 8m
web-2 0/1 Terminating 0 8m
web-2 0/1 Terminating 0 8m
web-2 0/1 Terminating 0 8m
web-2 0/1 Terminating 0 8m
web-2 0/1 Pending 0 0s
web-2 0/1 Pending 0 0s
web-2 0/1 ContainerCreating 0 0s
web-2 1/1 Running 0 19s
web-1 1/1 Terminating 0 8m
web-1 0/1 Terminating 0 8m
web-1 0/1 Terminating 0 8m
web-1 0/1 Terminating 0 8m
web-1 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-1 0/1 ContainerCreating 0 0s
web-1 1/1 Running 0 6s
web-0 1/1 Terminating 0 7m
web-0 1/1 Terminating 0 7m
web-0 0/1 Terminating 0 7m
web-0 0/1 Terminating 0 7m
web-0 0/1 Terminating 0 7m
web-0 0/1 Terminating 0 7m
web-0 0/1 Pending 0 0s
web-0 0/1 Pending 0 0s
web-0 0/1 ContainerCreating 0 0s
web-0 1/1 Running 0 10s
The Pods in the StatefulSet are updated in reverse ordinal order. The StatefulSet controller terminates each Pod, and waits for it to transition to Running and Ready prior to updating the next Pod. Note that, even though the StatefulSet controller will not proceed to update the next Pod until its ordinal successor is Running and Ready, it will restore any Pod that fails during the update to that Pod's existing version.
Pods that have already received the update will be restored to the updated version, and Pods that have not yet received the update will be restored to the previous version. In this way, the controller attempts to continue to keep the application healthy and the update consistent in the presence of intermittent failures.
Get the Pods to view their container images:
for p in 0 1 2; do kubectl get pod "web-$p" --template '{{range $i, $c := .spec.containers}}{{$c.image}}{{end}}'; echo; done
registry.k8s.io/nginx-slim:0.8
registry.k8s.io/nginx-slim:0.8
registry.k8s.io/nginx-slim:0.8
All the Pods in the StatefulSet are now running the previous container image.
kubectl rollout status sts/<name> to view
the status of a rolling update to a StatefulSet
Staging an update
You can split updates to a StatefulSet that uses the RollingUpdate strategy
into partitions, by specifying .spec.updateStrategy.rollingUpdate.partition.
For more context, you can read Partitioned rolling updates in the StatefulSet concept page.
You can stage an update to a StatefulSet by using the partition field within
.spec.updateStrategy.rollingUpdate.
For this update, you will keep the existing Pods in the StatefulSet
unchanged whilst you change the pod template for the StatefulSet.
Then you - or, outside of a tutorial, some external automation - can
trigger that prepared update.
First, patch the web StatefulSet to add a partition to the updateStrategy field:
# The value of "partition" determines which ordinals a change applies to
# Make sure to use a number bigger than the last ordinal for the
# StatefulSet
kubectl patch statefulset web -p '{"spec":{"updateStrategy":{"type":"RollingUpdate","rollingUpdate":{"partition":3}}}}'
statefulset.apps/web patched
Patch the StatefulSet again to change the container image that this StatefulSet uses:
kubectl patch statefulset web --type='json' -p='[{"op": "replace", "path": "/spec/template/spec/containers/0/image", "value":"registry.k8s.io/nginx-slim:0.7"}]'
statefulset.apps/web patched
Delete a Pod in the StatefulSet:
kubectl delete pod web-2
pod "web-2" deleted
Wait for the replacement web-2 Pod to be Running and Ready:
# End the watch when you see that web-2 is healthy
kubectl get pod -l app=nginx --watch
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 4m
web-1 1/1 Running 0 4m
web-2 0/1 ContainerCreating 0 11s
web-2 1/1 Running 0 18s
Get the Pod's container image:
kubectl get pod web-2 --template '{{range $i, $c := .spec.containers}}{{$c.image}}{{end}}'
registry.k8s.io/nginx-slim:0.8
Notice that, even though the update strategy is RollingUpdate the StatefulSet
restored the Pod with the original container image. This is because the
ordinal of the Pod is less than the partition specified by the
updateStrategy.
Rolling out a canary
You're now going to try a canary rollout of that staged change.
You can roll out a canary (to test the modified template) by decrementing the partition
you specified above.
Patch the StatefulSet to decrement the partition:
# The value of "partition" should match the highest existing ordinal for
# the StatefulSet
kubectl patch statefulset web -p '{"spec":{"updateStrategy":{"type":"RollingUpdate","rollingUpdate":{"partition":2}}}}'
statefulset.apps/web patched
The control plane triggers replacement for web-2 (implemented by
a graceful delete followed by creating a new Pod once the deletion
is complete).
Wait for the new web-2 Pod to be Running and Ready.
# This should already be running
kubectl get pod -l app=nginx --watch
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 4m
web-1 1/1 Running 0 4m
web-2 0/1 ContainerCreating 0 11s
web-2 1/1 Running 0 18s
Get the Pod's container:
kubectl get pod web-2 --template '{{range $i, $c := .spec.containers}}{{$c.image}}{{end}}'
registry.k8s.io/nginx-slim:0.7
When you changed the partition, the StatefulSet controller automatically
updated the web-2 Pod because the Pod's ordinal was greater than or equal to
the partition.
Delete the web-1 Pod:
kubectl delete pod web-1
pod "web-1" deleted
Wait for the web-1 Pod to be Running and Ready.
# This should already be running
kubectl get pod -l app=nginx --watch
The output is similar to:
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 6m
web-1 0/1 Terminating 0 6m
web-2 1/1 Running 0 2m
web-1 0/1 Terminating 0 6m
web-1 0/1 Terminating 0 6m
web-1 0/1 Terminating 0 6m
web-1 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-1 0/1 ContainerCreating 0 0s
web-1 1/1 Running 0 18s
Get the web-1 Pod's container image:
kubectl get pod web-1 --template '{{range $i, $c := .spec.containers}}{{$c.image}}{{end}}'
registry.k8s.io/nginx-slim:0.8
web-1 was restored to its original configuration because the Pod's ordinal
was less than the partition. When a partition is specified, all Pods with an
ordinal that is greater than or equal to the partition will be updated when the
StatefulSet's .spec.template is updated. If a Pod that has an ordinal less
than the partition is deleted or otherwise terminated, it will be restored to
its original configuration.
Phased roll outs
You can perform a phased roll out (e.g. a linear, geometric, or exponential
roll out) using a partitioned rolling update in a similar manner to how you
rolled out a canary. To perform a phased roll out, set
the partition to the ordinal at which you want the controller to pause the
update.
The partition is currently set to 2. Set the partition to 0:
kubectl patch statefulset web -p '{"spec":{"updateStrategy":{"type":"RollingUpdate","rollingUpdate":{"partition":0}}}}'
statefulset.apps/web patched
Wait for all of the Pods in the StatefulSet to become Running and Ready.
# This should already be running
kubectl get pod -l app=nginx --watch
The output is similar to:
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 3m
web-1 0/1 ContainerCreating 0 11s
web-2 1/1 Running 0 2m
web-1 1/1 Running 0 18s
web-0 1/1 Terminating 0 3m
web-0 1/1 Terminating 0 3m
web-0 0/1 Terminating 0 3m
web-0 0/1 Terminating 0 3m
web-0 0/1 Terminating 0 3m
web-0 0/1 Terminating 0 3m
web-0 0/1 Pending 0 0s
web-0 0/1 Pending 0 0s
web-0 0/1 ContainerCreating 0 0s
web-0 1/1 Running 0 3s
Get the container image details for the Pods in the StatefulSet:
for p in 0 1 2; do kubectl get pod "web-$p" --template '{{range $i, $c := .spec.containers}}{{$c.image}}{{end}}'; echo; done
registry.k8s.io/nginx-slim:0.7
registry.k8s.io/nginx-slim:0.7
registry.k8s.io/nginx-slim:0.7
By moving the partition to 0, you allowed the StatefulSet to
continue the update process.
OnDelete
You select this update strategy for a StatefulSet by setting the
.spec.template.updateStrategy.type to OnDelete.
Patch the web StatefulSet to use the OnDelete update strategy:
kubectl patch statefulset web -p '{"spec":{"updateStrategy":{"type":"OnDelete"}}}'
statefulset.apps/web patched
When you select this update strategy, the StatefulSet controller does not
automatically update Pods when a modification is made to the StatefulSet's
.spec.template field. You need to manage the rollout yourself - either
manually, or using separate automation.
Deleting StatefulSets
StatefulSet supports both non-cascading and cascading deletion. In a non-cascading delete, the StatefulSet's Pods are not deleted when the StatefulSet is deleted. In a cascading delete, both the StatefulSet and its Pods are deleted.
Read Use Cascading Deletion in a Cluster to learn about cascading deletion generally.
Non-cascading delete
In one terminal window, watch the Pods in the StatefulSet.
# End this watch when there are no Pods for the StatefulSet
kubectl get pods --watch -l app=nginx
Use kubectl delete to delete the
StatefulSet. Make sure to supply the --cascade=orphan parameter to the
command. This parameter tells Kubernetes to only delete the StatefulSet, and to
not delete any of its Pods.
kubectl delete statefulset web --cascade=orphan
statefulset.apps "web" deleted
Get the Pods, to examine their status:
kubectl get pods -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 6m
web-1 1/1 Running 0 7m
web-2 1/1 Running 0 5m
Even though web has been deleted, all of the Pods are still Running and Ready.
Delete web-0:
kubectl delete pod web-0
pod "web-0" deleted
Get the StatefulSet's Pods:
kubectl get pods -l app=nginx
NAME READY STATUS RESTARTS AGE
web-1 1/1 Running 0 10m
web-2 1/1 Running 0 7m
As the web StatefulSet has been deleted, web-0 has not been relaunched.
In one terminal, watch the StatefulSet's Pods.
# Leave this watch running until the next time you start a watch
kubectl get pods --watch -l app=nginx
In a second terminal, recreate the StatefulSet. Note that, unless
you deleted the nginx Service (which you should not have), you will see
an error indicating that the Service already exists.
kubectl apply -f https://k8s.io/examples/application/web/web.yaml
statefulset.apps/web created
service/nginx unchanged
Ignore the error. It only indicates that an attempt was made to create the nginx headless Service even though that Service already exists.
Examine the output of the kubectl get command running in the first terminal.
# This should already be running
kubectl get pods --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-1 1/1 Running 0 16m
web-2 1/1 Running 0 2m
NAME READY STATUS RESTARTS AGE
web-0 0/1 Pending 0 0s
web-0 0/1 Pending 0 0s
web-0 0/1 ContainerCreating 0 0s
web-0 1/1 Running 0 18s
web-2 1/1 Terminating 0 3m
web-2 0/1 Terminating 0 3m
web-2 0/1 Terminating 0 3m
web-2 0/1 Terminating 0 3m
When the web StatefulSet was recreated, it first relaunched web-0.
Since web-1 was already Running and Ready, when web-0 transitioned to
Running and Ready, it adopted this Pod. Since you recreated the StatefulSet
with replicas equal to 2, once web-0 had been recreated, and once
web-1 had been determined to already be Running and Ready, web-2 was
terminated.
Now take another look at the contents of the index.html file served by the
Pods' webservers:
for i in 0 1; do kubectl exec -i -t "web-$i" -- curl http://localhost/; done
web-0
web-1
Even though you deleted both the StatefulSet and the web-0 Pod, it still
serves the hostname originally entered into its index.html file. This is
because the StatefulSet never deletes the PersistentVolumes associated with a
Pod. When you recreated the StatefulSet and it relaunched web-0, its original
PersistentVolume was remounted.
Cascading delete
In one terminal window, watch the Pods in the StatefulSet.
# Leave this running until the next page section
kubectl get pods --watch -l app=nginx
In another terminal, delete the StatefulSet again. This time, omit the
--cascade=orphan parameter.
kubectl delete statefulset web
statefulset.apps "web" deleted
Examine the output of the kubectl get command running in the first terminal,
and wait for all of the Pods to transition to Terminating.
# This should already be running
kubectl get pods --watch -l app=nginx
NAME READY STATUS RESTARTS AGE
web-0 1/1 Running 0 11m
web-1 1/1 Running 0 27m
NAME READY STATUS RESTARTS AGE
web-0 1/1 Terminating 0 12m
web-1 1/1 Terminating 0 29m
web-0 0/1 Terminating 0 12m
web-0 0/1 Terminating 0 12m
web-0 0/1 Terminating 0 12m
web-1 0/1 Terminating 0 29m
web-1 0/1 Terminating 0 29m
web-1 0/1 Terminating 0 29m
As you saw in the Scaling Down section, the Pods are terminated one at a time, with respect to the reverse order of their ordinal indices. Before terminating a Pod, the StatefulSet controller waits for the Pod's successor to be completely terminated.
nginx Service manually.
kubectl delete service nginx
service "nginx" deleted
Recreate the StatefulSet and headless Service one more time:
kubectl apply -f https://k8s.io/examples/application/web/web.yaml
service/nginx created
statefulset.apps/web created
When all of the StatefulSet's Pods transition to Running and Ready, retrieve
the contents of their index.html files:
for i in 0 1; do kubectl exec -i -t "web-$i" -- curl http://localhost/; done
web-0
web-1
Even though you completely deleted the StatefulSet, and all of its Pods, the
Pods are recreated with their PersistentVolumes mounted, and web-0 and
web-1 continue to serve their hostnames.
Finally, delete the nginx Service...
kubectl delete service nginx
service "nginx" deleted
...and the web StatefulSet:
kubectl delete statefulset web
statefulset "web" deleted
Pod management policy
For some distributed systems, the StatefulSet ordering guarantees are unnecessary and/or undesirable. These systems require only uniqueness and identity.
You can specify a Pod management policy to avoid this strict ordering;
either OrderedReady (the default)
or Parallel.
Parallel Pod management
Parallel pod management tells the StatefulSet controller to launch or
terminate all Pods in parallel, and not to wait for Pods to become Running
and Ready or completely terminated prior to launching or terminating another
Pod. This option only affects the behavior for scaling operations. Updates are not affected.
apiVersion: v1
kind: Service
metadata:
name: nginx
labels:
app: nginx
spec:
ports:
- port: 80
name: web
clusterIP: None
selector:
app: nginx
---
apiVersion: apps/v1
kind: StatefulSet
metadata:
name: web
spec:
serviceName: "nginx"
podManagementPolicy: "Parallel"
replicas: 2
selector:
matchLabels:
app: nginx
template:
metadata:
labels:
app: nginx
spec:
containers:
- name: nginx
image: registry.k8s.io/nginx-slim:0.8
ports:
- containerPort: 80
name: web
volumeMounts:
- name: www
mountPath: /usr/share/nginx/html
volumeClaimTemplates:
- metadata:
name: www
spec:
accessModes: [ "ReadWriteOnce" ]
resources:
requests:
storage: 1Gi
This manifest is identical to the one you downloaded above except that the .spec.podManagementPolicy
of the web StatefulSet is set to Parallel.
In one terminal, watch the Pods in the StatefulSet.
# Leave this watch running until the end of the section
kubectl get pod -l app=nginx --watch
In another terminal, create the StatefulSet and Service in the manifest:
kubectl apply -f https://k8s.io/examples/application/web/web-parallel.yaml
service/nginx created
statefulset.apps/web created
Examine the output of the kubectl get command that you executed in the first terminal.
# This should already be running
kubectl get pod -l app=nginx --watch
NAME READY STATUS RESTARTS AGE
web-0 0/1 Pending 0 0s
web-0 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-1 0/1 Pending 0 0s
web-0 0/1 ContainerCreating 0 0s
web-1 0/1 ContainerCreating 0 0s
web-0 1/1 Running 0 10s
web-1 1/1 Running 0 10s
The StatefulSet controller launched both web-0 and web-1 at almost the
same time.
Keep the second terminal open, and, in another terminal window scale the StatefulSet:
kubectl scale statefulset/web --replicas=4
statefulset.apps/web scaled
Examine the output of the terminal where the kubectl get command is running.
web-3 0/1 Pending 0 0s
web-3 0/1 Pending 0 0s
web-3 0/1 Pending 0 7s
web-3 0/1 ContainerCreating 0 7s
web-2 1/1 Running 0 10s
web-3 1/1 Running 0 26s
The StatefulSet launched two new Pods, and it did not wait for the first to become Running and Ready prior to launching the second.
Cleaning up
You should have two terminals open, ready for you to run kubectl commands as
part of cleanup.
kubectl delete sts web
# sts is an abbreviation for statefulset
You can watch kubectl get to see those Pods being deleted.
# end the watch when you've seen what you need to
kubectl get pod -l app=nginx --watch
web-3 1/1 Terminating 0 9m
web-2 1/1 Terminating 0 9m
web-3 1/1 Terminating 0 9m
web-2 1/1 Terminating 0 9m
web-1 1/1 Terminating 0 44m
web-0 1/1 Terminating 0 44m
web-0 0/1 Terminating 0 44m
web-3 0/1 Terminating 0 9m
web-2 0/1 Terminating 0 9m
web-1 0/1 Terminating 0 44m
web-0 0/1 Terminating 0 44m
web-2 0/1 Terminating 0 9m
web-2 0/1 Terminating 0 9m
web-2 0/1 Terminating 0 9m
web-1 0/1 Terminating 0 44m
web-1 0/1 Terminating 0 44m
web-1 0/1 Terminating 0 44m
web-0 0/1 Terminating 0 44m
web-0 0/1 Terminating 0 44m
web-0 0/1 Terminating 0 44m
web-3 0/1 Terminating 0 9m
web-3 0/1 Terminating 0 9m
web-3 0/1 Terminating 0 9m
During deletion, a StatefulSet removes all Pods concurrently; it does not wait for a Pod's ordinal successor to terminate prior to deleting that Pod.
Close the terminal where the kubectl get command is running and delete the nginx
Service:
kubectl delete svc nginx
Delete the persistent storage media for the PersistentVolumes used in this tutorial.
kubectl get pvc
NAME STATUS VOLUME CAPACITY ACCESS MODES STORAGECLASS AGE
www-web-0 Bound pvc-2bf00408-d366-4a12-bad0-1869c65d0bee 1Gi RWO standard 25m
www-web-1 Bound pvc-ba3bfe9c-413e-4b95-a2c0-3ea8a54dbab4 1Gi RWO standard 24m
www-web-2 Bound pvc-cba6cfa6-3a47-486b-a138-db5930207eaf 1Gi RWO standard 15m
www-web-3 Bound pvc-0c04d7f0-787a-4977-8da3-d9d3a6d8d752 1Gi RWO standard 15m
www-web-4 Bound pvc-b2c73489-e70b-4a4e-9ec1-9eab439aa43e 1Gi RWO standard 14m
kubectl get pv
NAME CAPACITY ACCESS MODES RECLAIM POLICY STATUS CLAIM STORAGECLASS REASON AGE
pvc-0c04d7f0-787a-4977-8da3-d9d3a6d8d752 1Gi RWO Delete Bound default/www-web-3 standard 15m
pvc-2bf00408-d366-4a12-bad0-1869c65d0bee 1Gi RWO Delete Bound default/www-web-0 standard 25m
pvc-b2c73489-e70b-4a4e-9ec1-9eab439aa43e 1Gi RWO Delete Bound default/www-web-4 standard 14m
pvc-ba3bfe9c-413e-4b95-a2c0-3ea8a54dbab4 1Gi RWO Delete Bound default/www-web-1 standard 24m
pvc-cba6cfa6-3a47-486b-a138-db5930207eaf 1Gi RWO Delete Bound default/www-web-2 standard 15m
kubectl delete pvc www-web-0 www-web-1 www-web-2 www-web-3 www-web-4
persistentvolumeclaim "www-web-0" deleted
persistentvolumeclaim "www-web-1" deleted
persistentvolumeclaim "www-web-2" deleted
persistentvolumeclaim "www-web-3" deleted
persistentvolumeclaim "www-web-4" deleted
kubectl get pvc
No resources found in default namespace.